Donate to the MX-3.com Forums
View unanswered posts | View active topics It is currently January 29 2020, 3:55 AM



Reply to topic  [ 20 posts ]  Go to page 1, 2  Next
 CARBON FIBER HATCH BULK BUY 
Author Message
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post CARBON FIBER HATCH BULK BUY
For daily posts, please check:

http://www.mx-3.com/phpBB3/viewtopic.ph ... &sk=t&sd=a

This thread has gauged that we can get enough commited ppl for me to start a BB.

THE PRODUCT HAS BEEN COMPLETED AS OF NOVEMBER 29. SHIPPING WILL START MONDAY DECEMBER 1ST.

THE FIRST DELIVEY IS TO COLIN AS WELL AS FURTHER TEST FIT SHOTS DONE WITH BETTER LIGHTING.

Official weigh in:

OEM Glass: 48 lbs
OEM Frame: 28 lbs
CF Frame: 12lbs

Lexan window will cut that number down dramatically but due to legal issues, it will not be offered.

$600 + shipping for Carbon Fiber

$500 + shipping for fiberglass

Coloured fabric extra $100

$USD at par with $CDN

AT LEAST 10 guys + donor. Being the donor entails removing the hatch and glass.

Payment structure:

Paypal :oscardevesa(at)gmail.com

Dep 1: $207
Dep 2: $207
Dep 3: $207 + shipping cost


PLEASE INCLUDE YOUR DONATION TO MX-3.COM IN YOUR FINAL DEPOST!!!


1.) Colin (Colinsmx3)(Donor) ---- CFRP.....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
2.) Mike Fortin (Nd4SpdSe) ------ CFRP.....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
3.) Jonathan Kwok (Flyer) -------- CFRP....[Paid in Full][Donation Rec'd to MX-3.com]
4.) Mark Koerbel (Mooneggs) ----- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
5.) Dana Thomas (stereoking15) - CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
6.) Nic Maukonen (Demonicdst) -- CFRP.....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
7.) Chris Sanders (Hotsiit) -------- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
8.) Cody Brooks (tehbrookzorz) -- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
9.) Jarid Perry (Cjthor) ----------- CFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]
10.) Jesse Fowler (Fowljesse) --- GFRP....[Paid in Full][Donation Rec'd to MX-3.com][COMPLETED]

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


Last edited by EZ_4_FUN on September 28 2009, 3:51 PM, edited 49 times in total.



September 06 2008, 5:53 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
I am now taking deposits. Please PM me for specific information and before sending any money.

I need all those interested to PM me you complete information including pnone number

I will make special accomodations as long as agreed upon before receiveing payment.

Price per Hatch will go up after the initial BB is complete so get in on it if your interested.

This price cannot be beat nor will you find this product anywhere else!

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


September 06 2008, 5:55 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
I'll be picking up the hatch today! Starting the tooling on Monday despite everyone not having paid their first deposits.

Please get your payment in or email me wrt it so that I account for everyone. The last thing I need is to see ppl on the committed list dropping like flies now that deposits are asked for...

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


September 11 2008, 11:44 AM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
The hatch looks good; some minor scratches but that will all come out with a good wet and after the mold is done.

By next week I expect to start the tooling and have it completed within a week of starting give or take.

Please PM me if you forsee any troubles getting your second deposit in by October 1.

Thats just under 3 weeks from now. Please PM me and advise so I have an idea where we stand, I have not heard back from all those with their fiirst deposit outstanding.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


September 12 2008, 12:25 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
If you have not made your first deposit, please do so at your earliest convenience.

Thanks!

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


September 20 2008, 9:33 AM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
I should have a prototype by Friday so please prepare your second deposits for the second week of October!!!.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


September 28 2008, 12:20 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
To make it easier for those in on the BB, I will split the donation with you. In other words you pay $15, I will cover the rest!

Please include your donation to MX-3.com with your second Deposit. Dont forget 3.5% for paypal fees!!!

Thanks!

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


September 28 2008, 12:24 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
Dajanxman appears to be the only member unpaid and not willing to respond to any of my PM's.

This still leaves us at the minimum 10 which is ok!

Friday is only days away. I expect to have something by then.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


October 01 2008, 1:16 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
Patience is a virtue of which not many have; I on the other hand have lots.lol.

Sorry but I don't have what I expected to show you guys today. Hang tight as we are way ahead of schedule anywho and will surely have a ready product before our proposed deadline of October 31.

Cheers,

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


October 03 2008, 12:10 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
By mid next week, I should be test fitting our first pull from the mold.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


October 11 2008, 12:29 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
I'm hoping to have enough time tomorrow after work to head over to the shop and snap some pics just to please the masses. So far everything seems to be ok, I need to look at the small glass partition to make sure we don't have any issues as that is the complex part for the mold design.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


October 16 2008, 6:54 PM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
Pics! What you are looking at is the original hatch used to make the mold, the bottom mold, top mold and the top half of the CF hatch.

We still need to make the partition and layup the bottom part. By next week I will have the first part.

Image
Image
Image
Image
Image

Yes, I realise the cutout for the window is not done; don't worry, everything will be as agreed.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


October 25 2008, 12:16 AM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
I'll have a finished part later this week.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


November 04 2008, 12:13 AM
Profile ICQ WWW
Supporting Member
User avatar

Joined: April 02 2001, 2:01 AM
Posts: 1026
Location: Toronto
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
Honestly, I'm so excited about the way the hatch turned out, I'm gonna hold off on the pics until tomorrow just to get you guys rowdy tomorrow...

Technical specs:

-OEM Hatch w/ glass: 77 lbs.

-OEM Hatch w/o glass: 28 lbs.

-CF Hatch w/o glass: 12 lbs.


One can deduce the glass is 49 lbs and savings of 16 lbs in the structural component itself. Needless to say I'm impresed with the overall rigidity as well; the frame is stiff and sits extremely well on the car.

The cutout for the little window is just as discussed and looks great. All the threads are done for the 3rd brake light and wiper motor as well as the studs for the hinges... Totally awesome.

_________________
OSKY
95 MX-3 GS ZE Turbo: MSnS-extra, AEM WB, Blitz boost controller, MSD 6A w/ Blaster2 Coil, ZE disty, Redtops @ 550, Walbro 255, Garrett T3/T04E 60 Trim w/ .63 A/R, 38mm Deltagate Mark II @4psi, FMIC, Apexi BOV, CM Dual friction, 4-6.25 Kickers, 2ch Alpine V12. That's Alll.

http://www.pakfeifertuning.com


Last edited by EZ_4_FUN on November 22 2008, 12:58 AM, edited 1 time in total.



November 05 2008, 11:02 PM
Profile ICQ WWW
Forum Moderator
User avatar

Joined: November 26 2000, 3:01 AM
Posts: 5018
Location: Portland Oregon
Reply with quote
Post Re: CARBON FIBER HATCH BULK BUY
EZ_4_FUN wrote:
Honestly, I'm so excited about the way the hatch turned out, I'm gonna hold off on the pics until tomorrow just to get you guys rowdy tomorrow...
.

Rowdy Rowdy!!! Pics Pics!!!

_________________
Jarid Perry
94 mx3 Turrrbooooo (not even close to stock) 302WHP
71 Chevy C20 (tow rig!!)
77 Jeep CJ5 (no way its stock)
06 MINI Cooper S JCW GP (few goodies) 210WHP
2008 MINI Cooper Clubman S


November 07 2008, 1:51 AM
Profile ICQ YIM WWW
Display posts from previous:  Sort by  
Reply to topic   [ 20 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.